Facade and roof systems made of metal

DEKPROFILE TR 18, 35, 50

DEKPROFILE TR 18 TR 35 TR 50

Colors Data sheet   References Enquiry

The visible element DEKPROFILE TR (W – Wall – Facade) creates a modern industrial look on the façade. The trapezoidal profile is very suitable for a more technical building character, where it highlights the accurate and clean lines of the object. The sheets can be positioned vertically, horizontally and even diagonally.

DEKMETAL supplies DEKPROFILE in a complete range, thus providing an easy and comprehensive concept. The system not only incorporates the substructure and bordering of details (around the windows, corners, attics, etc.), but also expert technical support.

DEKPROFILE TR can also be used as roofing. More information here

 

 
DSC06147.JPG DSC06157.JPG DSC04273.JPG DSC04286.JPG

 

TR 18 W - Wall - Facade

height of the wave     18 mm DEKPROFILE TR 18
axial distance of the waves     137,5 mm
structural width of the panel     1100 mm
total height of the panel     1155 mm
minimum length of the panel     500 mm 
maximum length of the panel     9000 mm
thickness     0,5 - 0,63 mm

TR 35 W - Wall - Facade

height of the wave     35 mm DEKPROFILE TR 35 Schéma
axial distance of the waves     207 mm
structural width of the panel     1035 mm
total height of the panel     1070 mm
minimum length of the panel     500 mm 
maximum length of the panel     15000 mm
thickness     0,5 - 1,0 mm

TR 50 W - Wall - Facade

height of the wave     48 mm DEKPROFILE TR 50 Schéma
axial distance of the waves     262,5 mm
structural width of the panel     1050 mm
total height of the panel     1088 mm
minimum length of the panel     500 mm 
maximum length of the panel     15000 mm
thickness     0,63 - 1,25 mm